ROADPLUS
Additives for Asphalt Modification
Their use enables the construction of road pavements with superior resistance to permanent deformation. Asphalt mixtures are modified by incorporating ROADPLUS additives directly into the plant mixer during production.
Advantages & Benefits
Direct introduction into the mixer of hot asphalt plant.
Dosing on the quantity to be produced.
No need for special equipment, a dosing device is sufficient.
Very easy to handle and transported and stored in "big bag".
Used for base and surface asphalt mixture.
Work with all grades of bitumen.
Extend pavement service life.
Possibility to reduce the thickness of the pavement by 20-30% compared to the traditional ones.
Instructions for Use
The additive must be introduced directly into the mixer of the production plant. The use of ROADPLUS makes it possible to obtain road pavements with high load-bearing capacity and improved resistance to fatigue and rutting formation.
Properties
Granules made of 100% recycled polymeric material.
Dosage
0,2÷0,6% by weight of the mix
Polymer additives designed to enhance the mechanical performance of asphalt mixtures. Their use enables the construction of road pavements with superior resistance to permanent deformation. Asphalt mixtures are modified by incorporating ROADPLUS additives directly into the plant mixer during production.
The road paving sector is constantly evolving. The increase in traffic volumes makes it necessary to use road pavements capable of maintaining safety and solidity requirements over time.
The market trend is to develop new technologies that allow the construction of road pavements, in geographic areas characterized by extreme climates, with asphalts having a longer life, better performance and higher safety standards.
At low and high temperatures, traditional bitumen can be brittle and soft, respectively. The phenomenon, associated with the dynamic stresses induced by traffic, especially intense and heavy traffic, irremediably affects the duration of a road pavement. Improving the mechanical performance of road pavements means designing and manufacturing bituminous mixtures resistant to deformation.
This can be achieved by using polymer modified bituminous binders by adding ROADPLUS additives directly into the mixer of the hot mix asphalt plant.
